Best picks

9 Best Mounts for HelloBaby Baby Monitors (November 2026)

Updated on · By the Baby Playpens & Bassinets team

The best HelloBaby baby monitor mounts include the HelloBaby Baby Monitor Mount for HB6550/ Pro/ for crib rails and shelves, the HelloBaby Monitor Clip Mount for HB6550/ Pro/ for clamping to furniture, and the GAHOGA 37-69 Adjustable Height Floor Stand for tall overhead views.

On this page (8 sections)
  1. The best HelloBaby monitor mounts, in order
  2. How to compare a HelloBaby monitor wall mount with clamp and floor options
  3. What is the best HelloBaby monitor mount for a crib?
  4. How do I choose a HelloBaby monitor wall mount?
  5. Which floor stand gives the best view without wall damage?
  6. Can one mount fit other camera brands too?
  7. How do I set up a HelloBaby mount safely?
  8. The verdict: which HelloBaby mount should you buy?

The best HelloBaby monitor mount for most cribs is the HelloBaby Baby Monitor Mount for HB6550/ Pro/, because its 20-inch flexible arm wraps around crib rails and shelves without tools or wall damage. If you want a clamp that grips furniture, a tall floor stand or a fixed wall bracket, this guide compares all three styles so you can match the mount to your room.

A good mount does more than hold a camera up. It sets your viewing angle, keeps cords away from your baby and decides whether you can move the camera in minutes or need to unscrew it from a wall.

That is why the type matters as much as the brand.

Our score weighs specs, features and buyer feedback against what you are shopping for. We compared compatibility lists, arm lengths, clamp ranges, height ranges and materials across all nine picks.

Our picks at a glance

  1. 1 HelloBaby Baby Monitor Mount for HB6550/ Pro/
    Best for crib rails and shelves

    HelloBaby Baby Monitor Mount for HB6550/ Pro/

    9.7/10 our score

    See it on Amazon
  2. 2 HelloBaby Monitor Clip Mount for HB6550/ Pro/
    Best for clamping to furniture

    HelloBaby Monitor Clip Mount for HB6550/ Pro/

    9.6/10 our score

    See it on Amazon
  3. 3 GAHOGA 37-69 Adjustable Height Floor Stand
    Best for tall overhead views

    GAHOGA 37-69 Adjustable Height Floor Stand

    9.6/10 our score

    See it on Amazon
  1. 4EYSAFT Baby Monitor Floor Stand Holder Mount

    EYSAFT Baby Monitor Floor Stand Holder Mount

    Best for wide camera compatibility
    Check it
  2. 5Derebir Baby Camera Monitor Mount Flexible HolderCheck it
  3. 6iTODOS Baby Monitor Floor Stand Holder Mount

    iTODOS Baby Monitor Floor Stand Holder Mount

    Best for keeping cords out of reach
    Check it
  4. 7wochel Tripod Baby Monitor Mount for HelloBabyCheck it
  5. 8SZSDMY 2Pcs Baby Monitor Wall Mount CompatibleCheck it
  6. 9AOZTSUN 67 inch Adjustable Height Baby MonitorCheck it

The best HelloBaby monitor mounts, in order

The top pick suits most crib setups, while the rest solve different problems. Read by the job you need done, not only by score order.

1

HelloBaby Baby Monitor Mount for HB6550/ Pro/: Best for crib rails and shelves

HelloBaby Baby Monitor Mount for HB6550/ Pro/, HelloBaby baby monitor mounts
9.7/10Our score
  • 20 inch flexible arm
  • Attaches to crib, cot and shelves
  • No tools or wall damage
  • Stainless steel and silicone

A flexible crib arm that wraps around rails or shelves and bends to aim the camera without screws or wall damage.

See it on Amazon

Pros

  • Wraps around crib and furniture
  • Fits many HelloBaby pan-tilt cameras
  • Folds for travel

Cons

  • Not for other brands
  • View depends on where you wrap it

This mount suits parents who want the camera on the crib itself. Its 20-inch flexible arm wraps around crib rails, cot sides, shelves and furniture, then bends and rotates to aim the camera at the sleeping area.

HelloBaby lists wide coverage, including HB6550, HB6550 Pro, HB6560, HB65, HB6240, HB6339, HB6351 and other pan-tilt models. Two included parts fit three types of camera bottoms, so you pick the adaptor that matches your camera base and twist the arm on by hand.

The frame uses stainless steel and silicone. That mix matters in daily use because the arm needs to hold its bent shape while the wrap stays put on a rail.

It folds and comes apart for travel, which helps at grandparents' homes or in a hotel. HelloBaby also gives a one-year warranty on this bracket.

The trade-off is placement. A wrap mount follows the rail you choose, so the view is only as good as that spot.

It is also HelloBaby only and will not fit VTech, VAVA or other brands.

Buy it if your HelloBaby camera is a pan-tilt model and your crib has a rail or shelf to wrap. Skip it if you want a fixed overhead view from a stand or wall.

HelloBaby Baby Monitor Mount for HB6550/ Pro/Check it on Amazon
2

HelloBaby Monitor Clip Mount for HB6550/ Pro/: Best for clamping to furniture

HelloBaby Monitor Clip Mount for HB6550/ Pro/, HelloBaby baby monitor mounts
9.6/10Our score
  • Adjustable metal clamp
  • Long gooseneck arm
  • 360 degree angle adjustment
  • No tools or wall damage

A clamp mount with a long gooseneck that grips flat panels, boards, cribs and furniture of varying thickness.

See it on Amazon

Pros

  • Clamp grips varied thicknesses
  • Bends to many angles
  • Easy to move between rooms

Cons

  • Needs a suitable edge or panel
  • Plastic body is less rigid than steel

This clip mount suits a different crib or furniture shape. Its adjustable metal clamp grips flat panels, wooden boards, cribs, railings and fixtures of varying thickness, where a wrap arm might slip.

A long gooseneck arm bends to any angle, so you can tilt and turn the camera without moving the clamp. HelloBaby lists the same broad pan-tilt range as the wrap mount, including HB6550, HB6560, HB65, HB40, HB6339, HB66 and HB6081.

The package includes one clip mount and two types of parts for HelloBaby pan and tilt cameras. That gives you a choice of adaptors for the camera bottom, with no screws, drilling or tools.

In daily use, the clamp is the key step. Tighten it on a firm edge, bend the gooseneck, then check the view from the parent unit before you leave the room.

Compared with the top pick, this version trades the wrap for a clamp. That is better on a thick panel and worse on a thin or round rail with no flat edge.

Buy it if you have a shelf, board or furniture edge to clamp to. Skip it if your crib has only thin rails and no clamp point.

HelloBaby Monitor Clip Mount for HB6550/ Pro/Check it on Amazon
3

GAHOGA 37-69 Adjustable Height Floor Stand: Best for tall overhead views

GAHOGA 37-69 Adjustable Height Floor Stand, HelloBaby baby monitor mounts
9.6/10Our score
  • 37-69 inch adjustable height
  • Gooseneck swivel holder
  • Weighted base with non-slip pad
  • Supports up to 2.2 lb

A tall floor stand with a weighted base and bendable gooseneck that keeps the camera far from the crib.

See it on Amazon

Pros

  • Tall enough for a full crib view
  • Stable weighted base
  • Fits many cameras with 1/4 thread

Cons

  • Takes floor space
  • Gooseneck holds up to 2.2 lb

This floor stand suits parents who want the camera high and far from the crib. Its height adjusts from 37.5 to 68.8 inches, so you can start at a mid height and raise it for a full overhead view.

A weighted base with a non-slip silicone pad helps the stand stay put on level floors. The gooseneck arm at the top bends in any direction and supports up to 2.2 lb.

GAHOGA lists HelloBaby models from HB6550 and HB6560 through HB65, HB6339 and HB66, plus many other brands and any camera with a standard 1/4 inch threaded hole. That wider fit helps if you switch camera brands later.

The stand uses aluminum and iron and assembles in about 3 minutes without tools. No sticking, drilling or wall work is needed.

The trade-off is floor space. A tall stand needs a clear corner where it will not be knocked, and the gooseneck adds a bend you must set firmly.

Buy it if you want a tall, stable overhead view without touching the crib or wall. Skip it if your nursery has no floor space beside the crib.

GAHOGA 37-69 Adjustable Height Floor StandCheck it on Amazon
4

EYSAFT Baby Monitor Floor Stand Holder Mount: Best for wide camera compatibility

EYSAFT Baby Monitor Floor Stand Holder Mount, HelloBaby baby monitor mounts
9.5/10Our score
  • 95-175 cm height adjustment
  • Metal arm and large flat base
  • Non-slip backing
  • No drilling or sticking

A floor stand with a large flat base, metal arm and broad compatibility across HelloBaby and other brands.

See it on Amazon

Pros

  • Broad camera compatibility
  • Large flat base
  • Adjusts from counter to overhead height

Cons

  • Camera not included
  • Base needs level floor space

This floor stand suits buyers who care about brand range. EYSAFT lists Infant Optics DXR-8 Pro, Nanit Pro and Flex Stand, VTech models, Momcozy, HelloBaby, VAVA, nooie and Motorola VM75, VM50G and VM44, plus cameras with a threaded hole and a base more than 2.3 inches wide.

Height adjusts from 95 cm to 175 cm, about 37.5 to 68.8 inches. A flexible arm bends for height and angle, so you can frame the crib from the side or above.

The base is large and flat with a non-slip backing, and the top arm is metal. Carbon steel construction is meant for longer service life.

No sticking or drilling is needed, and the stand keeps the camera far enough from the crib so your baby cannot reach the camera or cord. The camera is not included.

Compared with the GAHOGA, this stand leans more on compatibility breadth. Compared with clamp mounts, it gives up portability in return for height and reach.

Buy it if you want one stand that can serve several camera brands. Skip it if you need a small mount that travels in a bag.

EYSAFT Baby Monitor Floor Stand Holder MountCheck it on Amazon
5

Derebir Baby Camera Monitor Mount Flexible Holder: Best for thick crib sides

Derebir Baby Camera Monitor Mount Flexible Holder, HelloBaby baby monitor mounts
9.3/10Our score
  • 33.4 inch total length
  • Clamp fits 0.0 to 1.7 inch thickness
  • Camera clip for 2.6 to 3.34 inch bases
  • 1/4 inch accessory base included

A long flexible holder with a strong clamp and two ways to hold the camera, by clip or by threaded base.

See it on Amazon

Pros

  • Long reach for crib views
  • Clip and threaded base options
  • Protective pads on clamp

Cons

  • Clamp range is limited to 1.7 inch
  • Camera base size must fit the clip

This holder suits parents with a thick crib side or shelf. Its clamp fits furniture from 0.0 to 1.7 inch thick, with protective pads to help avoid damage to the crib or furniture.

The total length is 33.4 inches, which gives more reach than the 20-inch HelloBaby arms. You can bend and rotate it to set the viewing angle after the clamp is fixed.

There are two ways to hold the camera. A spring clip grips camera bottoms from 2.6 to 3.34 inches across, and an included accessory base fits devices with a standard 1/4 inch threaded hole.

Derebir lists HelloBaby HB6550, HB65, HB6560, HB66 and HB6339, plus Momcozy, Blemil, GoodBaby, OKAIDI, ANMEATE and Infant Optics models. The bracket uses reinforced aluminum alloy for bending resistance.

The trade-off is the clamp limit. If your furniture edge is thicker than 1.7 inches, this holder will not fit, and the clip needs a camera base in the stated size range.

Buy it if you need long reach and a clamp that fits your furniture thickness. Skip it if your edge is too thick or your camera base falls outside the clip range.

Derebir Baby Camera Monitor Mount Flexible HolderCheck it on Amazon
6

iTODOS Baby Monitor Floor Stand Holder Mount: Best for keeping cords out of reach

iTODOS Baby Monitor Floor Stand Holder Mount, HelloBaby baby monitor mounts
9.1/10Our score
  • 95-175 cm adjustable height
  • Heavy duty metal base
  • Anti-slip pad
  • Cable ties included

A metal floor stand that places the camera on the floor well away from the crib, with cable ties for tidy cords.

See it on Amazon

Pros

  • Keeps camera away from baby
  • Metal tube and gooseneck
  • Cable ties help cord control

Cons

  • Height changes by adding tubes
  • Needs floor space near the crib

This floor stand suits parents who want the camera on the floor and out of reach. iTODOS says the floor position keeps the camera well away from your baby, unlike mounts fixed to a bed or stroller that an infant could grab.

Height changes from 95 cm to 175 cm by assembling different numbers of metal tubes. A flexible gooseneck bends for the final angle, so you can remove blind spots without moving the base.

The base is heavy duty metal with an anti-slip pad to protect the floor from scratching. The round tube and gooseneck are metal for strength and stability.

It fits HelloBaby HB6550 and HB6560, Infant Optics DXR-8 Pro, Nanit Pro and Flex Stand, VTech VM819 and VM901, Momcozy, Owlet, eufy, Babysense, Motorola and any camera with a 1/4 inch threaded hole. Cable ties are included for cord organization.

The trade-off is setup. Adding or removing tubes to change height takes more time than bending a single pole, and the base still needs floor space.

Buy it if keeping the camera and cord away from the crib is your top priority. Skip it if you want quick height changes or a travel mount.

iTODOS Baby Monitor Floor Stand Holder MountCheck it on Amazon
7

wochel Tripod Baby Monitor Mount for HelloBaby: Best for desktops and shelves

wochel Tripod Baby Monitor Mount for HelloBaby, HelloBaby baby monitor mounts
8.9/10Our score
  • Tripod legs with silicone cover
  • Flexible angle
  • 3 adaptor connectors
  • No screws or drilling

A small tripod mount that wraps and sits on desks, shelves and tables to aim a HelloBaby camera where you want it.

See it on Amazon

Pros

  • Sits on flat surfaces
  • Silicone legs resist slipping
  • Three adaptors included

Cons

  • Lower height than floor stands
  • Camera not included

This tripod mount suits a desk, shelf or table setup. Its legs are covered with silicone, which helps the mount stay in place while you bend it to the ideal angle.

wochel lists HelloBaby HB6550, HB6560, HB6550 Plus, HB6148, HB6240, HB6351, HB6339, HB40, HB65 and HB66, plus GoodBaby SM663, ANMEATE models and other cameras with a standard 1/4 inch threaded hole. The camera is not included.

The box includes one tripod mount, three adaptor connectors and a manual. It installs and comes apart without screws, so you can move it between rooms or take it on a trip.

In daily use, this is a low, flexible option rather than a tall overhead view. Wrap or set the legs on a flat surface, bend the head, then check the framing.

The trade-off is height. It will not match a 68-inch floor stand for looking down into a crib, and it needs a surface that is wide and stable enough for the legs.

Buy it if you want a simple mount for a desk, shelf or table. Skip it if you need the camera high above the crib.

wochel Tripod Baby Monitor Mount for HelloBabyCheck it on Amazon
8

SZSDMY 2Pcs Baby Monitor Wall Mount Compatible: Best for a fixed wall view

SZSDMY 2Pcs Baby Monitor Wall Mount Compatible, HelloBaby baby monitor mounts
8.8/10Our score
  • 2 pack wall mounts
  • 360 degree rotation
  • 90 degree tilt
  • Standard 1/4 thread

A two-pack wall mount with 360 degree rotation and 90 degree tilt for a stable, fixed view over the nursery.

See it on Amazon

Pros

  • Two mounts for two rooms
  • Wide rotation and tilt
  • Stable fixed position

Cons

  • Holes in the wall
  • Baby monitor not included

This two-pack wall mount suits a fixed nursery view. It supports 360 degree rotation and 90 degree tilt, so you can aim the camera after it is screwed to the wall.

SZSDMY lists HelloBaby HB65, HB40, HB6550, HB6560, HB6148, HB66, HB6339 and HB6550 Pro, plus ANMEATE SM935E and most cameras with a standard 1/4 inch threaded hole. The baby monitor is not included.

The sturdy construction holds the camera without shaking or slipping in daily use. Two mounts in the box let you set one camera in the nursery and another in a playroom, or keep a spare.

For safety, SZSDMY advises placing the camera out of reach and not directly above your baby. A wall position also lets you route the cord down the wall and away from the crib.

The trade-off is permanence. Wall mounting means holes, and moving the camera means unscrewing it and patching the wall.

It is the least portable option here.

Buy it if you want a stable, fixed view and do not plan to move the camera often. Skip it if you rent, travel or want a no-damage setup.

SZSDMY 2Pcs Baby Monitor Wall Mount CompatibleCheck it on Amazon
9

AOZTSUN 67 inch Adjustable Height Baby Monitor: Best for a simple tall stand

AOZTSUN 67 inch Adjustable Height Baby Monitor, HelloBaby baby monitor mounts
8.6/10Our score
  • 94-170 cm height adjustment
  • Flexible gooseneck arm
  • Heavy duty base
  • Aluminum alloy construction

A 67 inch floor stand with a heavy duty base and bendable gooseneck for a high, adjustable camera position.

See it on Amazon

Pros

  • Tall reach for overhead views
  • Tool-free setup
  • Durable aluminum alloy

Cons

  • Baby monitor not included
  • Needs a stable floor spot

This floor stand suits parents who want a simple tall option. It adjusts from 94 cm to 170 cm, about 37 to 67 inches, with a flexible gooseneck that bends in any direction.

A heavy duty base adds stability, and the gooseneck and extension tube use solid aluminum alloy. AOZTSUN lists Infant Optics DXR-8 and DXR-8 Pro, eufy, HelloBaby HB6560, HB6550, HB65, HB66 and HB248, ANMEATE SM935E, Motorola, Arlo, Owlet, VTech and Nanit, plus any camera with a 1/4 inch threaded hole.

Setup needs no tools, and AOZTSUN provides clear instructions for assembly and disassembly. The baby monitor is not included.

In daily use, the height range covers a low side view and a high overhead view. Set the height, bend the gooseneck, then confirm the view covers the whole sleeping area.

The trade-off is the same as other floor stands. It needs floor space and a spot where it will not be tipped, and it is less portable than a clamp or wrap mount.

Buy it if you want a tall aluminum stand with a wide threaded-hole fit. Skip it if you need a compact crib mount for travel.

AOZTSUN 67 inch Adjustable Height Baby MonitorCheck it on Amazon

How to compare a HelloBaby monitor wall mount with clamp and floor options

A hello baby monitor wall mount gives you the most stable view, because the camera is fixed to the wall and does not depend on a rail or clamp. The cost is holes in the wall and less flexibility when you move rooms.

ProductBest forArm lengthMounting typeMaterialOur score
HelloBaby Baby Monitor Mount for HB6550/ Pro/crib rails and shelves20 inchesCrib holderSilicone, Stainless Steel9.7
HelloBaby Monitor Clip Mount for HB6550/ Pro/clamping to furniture20.5 inchesWall Mount, Pole MountPlastic9.6
GAHOGA 37-69 Adjustable Height Floor Standtall overhead viewsFloor Stand MountAluminum, Iron9.6
EYSAFT Baby Monitor Floor Stand Holder Mountwide camera compatibilityFloor StandCarbon steel9.5
Derebir Baby Camera Monitor Mount Flexible Holderthick crib sidesReinforced aluminum alloy9.3
iTODOS Baby Monitor Floor Stand Holder Mountkeeping cords out of reachFloor StandMetal9.1
wochel Tripod Baby Monitor Mount for HelloBabydesktops and shelvesTripod MountSilicone8.9
SZSDMY 2Pcs Baby Monitor Wall Mount Compatiblea fixed wall viewWall Mount8.8
AOZTSUN 67 inch Adjustable Height Baby Monitora simple tall standFloor StandingAluminum8.6

We compared these nine mounts by compatibility, mounting type, reach and height. Crib arms and clamps win on portability, floor stands win on height and cord distance, and wall mounts win on a fixed angle.

We also checked what is included, such as adaptors, cable ties and clamp ranges. Those details decide whether the mount fits your exact HelloBaby model without extra parts.

Our score weighs specs, features and buyer feedback against what you are shopping for. That is why the official HelloBaby crib arms score highest for HelloBaby cameras, while wider stands score well for multi-brand homes.

What is the best HelloBaby monitor mount for a crib?

The best hello baby monitor mount for a crib is the HelloBaby wrap arm if your crib has a rail you can wrap, or the HelloBaby clip mount if you have a thicker edge to clamp.

Wrap arms for crib rails

A wrap arm bends around a rail and needs no tools. It suits standard crib rails and shelves, and it folds for travel.

Clamp mounts for crib sides and shelves

A clamp grips an edge of set thickness. Check the thickness range first, such as 0.0 to 1.7 inch on the Derebir holder, before you order.

When a crib mount is not enough

If the view is too low or the cord is too close, switch to a floor stand. That keeps the camera higher and farther away.

How do I choose a HelloBaby monitor wall mount?

A best baby monitor wall mount suits a permanent nursery setup where you want the same angle every night. It also suits a wall above or beside the crib where no rail or shelf is available.

Check the camera thread and model list

Most wall mounts here fit a standard 1/4 inch threaded hole. Confirm your HelloBaby model is listed, such as HB6550, HB6560 or HB65, before you drill.

Plan the cord route first

Route the power cord down the wall and away from the crib. Keep the camera out of reach and not directly above your baby.

Consider a two-pack for two rooms

A two-pack lets you mount one camera in the nursery and one in another room. That saves buying a second mount later.

If you are still deciding between wall and crib options, our best baby monitor wall mount guide breaks down fixed views in more detail. You can also compare best baby monitor mounts and holders for the full range of clamp and wrap styles.

Which floor stand gives the best view without wall damage?

A floor stand from 37 to 69 inches gives a high view with no drilling. The GAHOGA, EYSAFT, iTODOS and AOZTSUN stands all adjust across that range.

Height for a full crib view

Start near the top of the range for a direct overhead view. Lower it if the image is too wide or the stand feels unsteady.

Base and floor space

A weighted or large flat base helps stability. Place the stand on a level floor where it will not be knocked or tipped.

Cord distance from the crib

A floor stand keeps the camera and cord far from the crib. That is the main safety reason many parents choose it over a crib mount.

For context on camera placement, our best baby monitor system guide explains how mount position affects the view you get from the parent unit.

Can one mount fit other camera brands too?

Some mounts fit more than HelloBaby, while the official HelloBaby mounts do not. Check the compatibility list for your exact camera before you order.

HelloBaby-only mounts

The HelloBaby wrap and clip mounts are for HelloBaby pan-tilt cameras and will not fit VTech, VAVA or other brands. That limit is stated in the product data.

Multi-brand stands and holders

Floor stands and the Derebir holder list Nanit, Infant Optics, VTech, Motorola, Momcozy, Owlet and others, plus any camera with a 1/4 inch threaded hole.

A note on VTech setups

If you use a VTech camera instead, our best VTech baby monitor crib mount guide covers mounts made for that brand. For a broader look at fixed setups, best wall mounted baby monitors compares cameras that pair with wall mounts.

How do I set up a HelloBaby mount safely?

Set up any mount so the camera has a clear view, the cord stays out of reach and the mount cannot be pulled down. Start by aiming the camera, then check the image before you secure the cord.

Aim and check the view first

Bend the arm or gooseneck, then look at the parent unit. Move the mount until the whole sleeping area is in frame.

Secure the cord away from the crib

Keep the cord out of your baby's reach at all times. Use cable ties on floor stands, and route wall cords down the wall.

Re-check after your baby starts moving

As your baby grows, re-check the clamp, wrap and base. Tighten the mount and move the cord if your baby can reach either one.

If the camera stops showing a picture after a move, our hello baby monitor black screen guide covers that fault. If the camera will not power on, start with why is your HelloBaby monitor not turning on.

For general faults, how to troubleshoot a HelloBaby baby monitor walks through the checks in order.

The verdict: which HelloBaby mount should you buy?

Pick the HelloBaby Baby Monitor Mount for HB6550/ Pro/ if you want a flexible crib arm with no tools and no wall damage. Pick the HelloBaby Monitor Clip Mount if you have a furniture edge to clamp.

Pick a floor stand if you want height and cord distance. Pick the SZSDMY wall mount if you want a fixed view and do not mind holes in the wall.

Match the mount to your exact HelloBaby model, such as HB6550, HB6560 or HB65, and check for a 1/4 inch threaded hole on multi-brand stands. Then set the view, secure the cord out of reach and re-check the mount as your baby grows.

Our top 3 picks at a glance

  1. 1 HelloBaby Baby Monitor Mount for HB6550/ Pro/
    Best for crib rails and shelves

    HelloBaby Baby Monitor Mount for HB6550/ Pro/

    9.7/10 our score

    See it on Amazon
  2. 2 HelloBaby Monitor Clip Mount for HB6550/ Pro/
    Best for clamping to furniture

    HelloBaby Monitor Clip Mount for HB6550/ Pro/

    9.6/10 our score

    See it on Amazon
  3. 3 GAHOGA 37-69 Adjustable Height Floor Stand
    Best for tall overhead views

    GAHOGA 37-69 Adjustable Height Floor Stand

    9.6/10 our score

    See it on Amazon

Frequently asked questions

Which HelloBaby monitor mount fits my camera?

Check your exact HelloBaby model first, such as HB6550, HB6560, HB65 or HB6339. The official HelloBaby mounts list those models and include adaptors for different camera bottoms.

For stands and wall mounts, also check for a standard 1/4 inch threaded hole on your camera.

Is a crib mount or a floor stand safer?

A floor stand keeps the camera and cord farther from the crib, so a baby cannot reach them. A crib mount puts the camera closer, so route the cord away from the crib and keep it out of reach.

Choose the position based on your room layout and your baby's age and movement.

Do I need tools to install a HelloBaby mount?

Crib arms, clamp mounts, tripods and floor stands here need no tools and no wall damage. Wall mounts need screws and holes in the wall.

If you rent or want a temporary setup, choose a clamp, wrap or floor option.

Can these mounts work with other brands?

Some stands and holders fit other brands with a 1/4 inch threaded hole, including Nanit, Infant Optics, VTech and Motorola models listed in the data. The official HelloBaby mounts are for HelloBaby cameras only and will not fit VTech, VAVA and similar brands.

Match the mount to your camera base before you order.

How high should I place the camera?

High enough to see the whole sleeping area without placing the camera directly above your baby. Floor stands in this guide adjust from about 37 inches to 69 inches, so you can start lower and raise it in steps.

Aim the camera, check the view on the parent unit, then move the cord out of reach.