Best picks

9 Best Floor Stands for Baby Monitor Cameras (November 2026)

Updated on · By the Baby Playpens & Bassinets team

The best floor stands for baby monitor cameras include the Didalo Floor Stand for Nanit Pro Baby for Nanit Pro owners, the GAHOGA 37-69 Adjustable Height Floor Stand for wide camera fit, and the HelloBaby Baby Monitor Floor Stand for HelloBaby cameras.

On this page (10 sections)
  1. How to use this baby monitor floor stand roundup
  2. The best baby monitor floor stands in order
  3. How do floor stands compare with other baby monitor mounts?
  4. How we compared these floor stands for baby monitors
  5. What height do you need for a baby monitor floor stand?
  6. Which camera fit should you check before you buy?
  7. How stable should a baby monitor floor stand base be?
  8. How do you keep baby monitor cords safe on a floor stand?
  9. When should you choose a floor stand over a wall mount?
  10. Verdict: which baby monitor floor stand should you buy?

The best baby monitor floor stand for most Nanit Pro owners is the Didalo Floor Stand for Nanit Pro Baby, because it adjusts from 37.4 to 68.8 inches, uses a snap-on Nanit fit and needs no tools or wall damage.

If you own a HelloBaby camera, the HelloBaby stand is the more direct match.

If your brand is less certain, a universal stand with a 1/4 inch thread fit gives you more options.

A floor stand solves a simple placement problem.

You can put the camera high enough to look down into a crib or bassinet, and you can keep cords away from the sleeping area.

You also avoid drilling, stickers or searching for furniture that happens to be near the crib.

Our score weighs specs, features and buyer feedback against what you're shopping for.

Height range, base stability, camera fit and cord handling matter more here than styling.

A stand that fits the wrong camera is not a good buy, even when its height range looks right.

Start with your camera brand before you compare heights.

Nanit Pro, HelloBaby and Owlet cameras attach in different ways.

Some universal stands list exact models, while others rely on a 1/4 inch threaded hole.

If you want a broader view of the category, read our baby monitor system guide first.

That guide covers cameras, screens and apps.

This post covers only the freestanding support.

Our picks at a glance

  1. 1 Didalo Floor Stand for Nanit Pro Baby
    Best for Nanit Pro owners

    Didalo Floor Stand for Nanit Pro Baby

    9.7/10 our score

    See it on Amazon
  2. 2 GAHOGA 37-69 Adjustable Height Floor Stand
    Best for wide camera fit

    GAHOGA 37-69 Adjustable Height Floor Stand

    9.6/10 our score

    See it on Amazon
  3. 3 HelloBaby Baby Monitor Floor Stand
    Best for HelloBaby cameras

    HelloBaby Baby Monitor Floor Stand

    9.6/10 our score

    See it on Amazon
  1. 4Nanit Smart Baby Video Monitor

    Nanit Smart Baby Video Monitor

    Best for camera and stand in one
    Check it
  2. 5GAHOGA Baby Monitor Floor Stand for HelloBaby

    GAHOGA Baby Monitor Floor Stand for HelloBaby

    Best for HelloBaby and Owlet mix
    Check it
  3. 6GAHOGA Floor Stand for Nanit Baby Monitor

    GAHOGA Floor Stand for Nanit Baby Monitor

    Best for enclosed Nanit hold
    Check it
  4. 7CaGuan Baby Monitor Floor Stand for HelloBaby/NanitCheck it
  5. 8Jartoo Floor Stand for Nanit Pro Baby

    Jartoo Floor Stand for Nanit Pro Baby

    Best for hidden cable routing
    Check it
  6. 9AISVAN 67 Baby Monitor Floor Stand

    AISVAN 67 Baby Monitor Floor Stand

    Best for Owlet and HelloBaby mix
    Check it

How to use this baby monitor floor stand roundup

The picks below are ordered by score, from highest to lowest.

Height range and fit drive most of the ranking.

A Nanit-specific stand scores higher for Nanit owners, while a universal stand scores higher for mixed or uncertain brands.

We compared the stated height ranges, base designs, gooseneck support limits and included adapters.

We also checked which cameras each stand lists by name.

No stand here adds a camera unless the product is the complete Nanit monitor set.

The best baby monitor floor stands in order

1

Didalo Floor Stand for Nanit Pro Baby: Best for Nanit Pro owners

Didalo Floor Stand for Nanit Pro Baby, floor stands for baby monitor cameras
9.7/10Our score
  • Adjusts from 37.4 to 68.8 in
  • Gooseneck swivel holder
  • Heavy solid iron base
  • Snap-on Nanit fit, camera not included

A Nanit-specific floor stand that adjusts tall enough for cribs and bassinets, with a gooseneck arm for aiming the camera down into the sleeping area.

See it on Amazon

Pros

  • Tall 68.8 in reach
  • Snap-on Nanit connection
  • No tools or wall damage

Cons

  • Nanit-specific fit
  • Camera not included

The Didalo suits Nanit Pro owners who want a tall, tool-free floor stand.

It adjusts from 37.4 inches to 68.8 inches, so you can set the camera above a crib rail and bend the gooseneck to aim down into the sleeping area.

Its snap-on design is the main reason it ranks first here.

Didalo says you can snap a Nanit camera out of a Flex Stand, wall mount or floor stand and into this stand.

That helps if you already own a Nanit mount and want to change placement without buying a new camera.

The heavy solid iron base and extension tube matter for daily use.

A taller stand can wobble if the base is light, so a heavier base gives more confidence on a level floor.

The gooseneck also bends for angle control after you set the height.

The trade-off is fit.

This is a Nanit-focused stand, and the camera is not included.

If you own a HelloBaby or Owlet camera, a universal stand will be a better match.

Our Nanit monitor stand guide helps you compare Nanit floor, wall and Flex options before you commit.

Didalo Floor Stand for Nanit Pro BabyCheck it on Amazon
2

GAHOGA 37-69 Adjustable Height Floor Stand: Best for wide camera fit

GAHOGA 37-69 Adjustable Height Floor Stand, floor stands for baby monitor cameras
9.6/10Our score
  • Adjusts from 37.5 to 68.8 in
  • Aluminium pole, weighted base
  • Gooseneck supports up to 2.2 lb
  • 1/4 inch thread fit for many brands

A universal floor stand for HelloBaby, Nanit Pro with Flex Stand, Owlet and other cameras with a standard 1/4 inch threaded hole.

See it on Amazon

Pros

  • Broad brand compatibility
  • Weighted base with non-slip pad
  • Assembles in about 3 minutes

Cons

  • Speed of adjustment depends on pole sections
  • Camera weight limit is 2.2 lb

The GAHOGA 37-69 inch stand suits owners who want one stand for several camera brands.

It adjusts from 37.5 to 68.8 inches and fits HelloBaby models, Nanit Pro with Flex Stand, Owlet, Infant Optics DXR-8 Pro, Motorola, VAVA and other cameras with a 1/4 inch threaded hole.

That wide fit is useful when you move between rooms or upgrade a camera later.

You do not need a new stand each time you change brands, as long as the new camera has the standard thread.

Check the exact model list before you order, because compatibility is stated by model rather than by brand alone.

The weighted base and non-slip silicone pad help stability.

GAHOGA says the gooseneck supports up to 2.2 lb, which gives you a clear limit to check against your camera weight.

The aluminium pole is also described as rust-proof, which helps in a humid nursery.

The trade-off is a generic fit rather than a brand-specific snap connection.

A Nanit Pro camera may need the Flex Stand path for this mount.

If that detail matters, compare it with a Nanit-specific stand such as the Didalo.

GAHOGA 37-69 Adjustable Height Floor StandCheck it on Amazon
3

HelloBaby Baby Monitor Floor Stand: Best for HelloBaby cameras

HelloBaby Baby Monitor Floor Stand, floor stands for baby monitor cameras
9.6/10Our score
  • Adjusts from 30 to 58.2 in
  • Flexible gooseneck
  • Metal construction
  • Fits many HelloBaby models and 1/4 inch cameras

A HelloBaby-focused stand with a telescopic pole and gooseneck, sized for cribs and bassinets where a full 58.2 inch height is not needed.

See it on Amazon

Pros

  • Direct fit for listed HelloBaby models
  • No drilling or wall sticking
  • Keeps camera and cords away from the crib

Cons

  • Shorter maximum height than tall stands
  • Monitor not included

The HelloBaby stand suits owners of HelloBaby video monitors who want a direct, no-drill fit.

It telescopes from 30 inches to 58.2 inches, which covers bassinets and many cribs without the extra height of a 69 inch stand.

HelloBaby lists HB6550, HB6560, HB65, HB6148, HB6351, HB40 and HB6339 models, plus other cameras with a 1/4 inch threaded screw.

That direct list makes fit easier to check than a vague universal claim.

The monitor itself is not included.

The gooseneck bends in any direction, so you can angle the camera after you set the pole height.

Keeping the camera and cords high also keeps them away from a baby who can reach or grab.

That safety benefit matters as babies grow and start pulling at loose objects.

The trade-off is maximum height.

At 58.2 inches, this stand may not look down far enough into a tall crib for some parents.

If you want a higher overhead view, the taller universal stands in this roundup are a better match.

HelloBaby Baby Monitor Floor StandCheck it on Amazon
4

Nanit Smart Baby Video Monitor: Best for camera and stand in one

Nanit Smart Baby Video Monitor, floor stands for baby monitor cameras
9.5/10Our score
  • 1080p Wi-Fi camera with floor stand
  • Two-way audio and infrared night vision
  • Motion, sound, temperature and humidity alerts
  • Floor stand or wall mount setup

A complete Nanit camera and floor stand set for parents who want the monitor and its freestanding support together.

See it on Amazon

Pros

  • Camera and stand in one purchase
  • Sleep tracking and smart alerts
  • Two-way audio and night vision

Cons

  • Higher cost than a stand alone
  • Advanced sleep features use a paid plan

The Nanit Smart Baby Video Monitor suits parents who want the camera and floor stand together.

It is a 1080p Wi-Fi camera with a floor stand, rather than a stand alone.

That makes it simpler to buy if you do not already own a compatible camera.

Nanit says the camera tracks sleep duration, efficiency and disturbances, and it offers motion, sound, temperature and humidity alerts.

Two-way audio and infrared night vision help you check on a baby from your phone, Alexa or Google Home.

The setup choice is part of the value here.

You can use the floor stand for freestanding placement or choose a wall mount for a fixed overhead view.

That flexibility helps in a shared bedroom or a dedicated nursery, where the best camera spot may change.

The trade-off is scope and cost.

Advanced sleep coach features use a paid plan, while core live streaming, alerts and two-way audio work without that subscription.

If you already own a Nanit camera, a stand alone will cost less.

Nanit Smart Baby Video MonitorCheck it on Amazon
5

GAHOGA Baby Monitor Floor Stand for HelloBaby: Best for HelloBaby and Owlet mix

GAHOGA Baby Monitor Floor Stand for HelloBaby, floor stands for baby monitor cameras
9.4/10Our score
  • Adjusts from 37.4 to 69 in
  • Weighted base with non-slip pads
  • Gooseneck supports up to 2.2 lb
  • 360 degree rotation and swivel

A universal stand aimed at HelloBaby, Nanit Pro with Flex Stand, Owlet and Infant Optics cameras, with a tall adjustable pole.

See it on Amazon

Pros

  • Tall 69 in maximum height
  • Weighted stable base
  • No wall mounting or drilling

Cons

  • Uses a generic 1/4 inch fit for most brands
  • Camera sold separately

The GAHOGA stand for HelloBaby suits owners who want a tall universal stand with a clear model list.

It adjusts from 37.4 to 69 inches and fits HelloBaby models, Nanit Pro with Flex Stand, Owlet, Infant Optics DXR-8 Pro, Motorola, VAVA and GoodBaby SM663.

The 69 inch top end is taller than most picks here.

That helps you look down into a crib from a higher angle, which can show more of the mattress surface.

The gooseneck then fine-tunes the exact view after you lock the height.

Stability comes from a weighted base and non-slip pads.

GAHOGA says the gooseneck supports up to 2.2 lb and rotates 360 degrees, so you can swivel the camera toward a bassinet, crib or toddler bed without moving the base.

The trade-off is that most brands use the generic 1/4 inch thread fit.

A Nanit Pro camera uses the Flex Stand path on this stand.

Check your exact camera model before you order, especially if you plan to switch brands later.

GAHOGA Baby Monitor Floor Stand for HelloBabyCheck it on Amazon
6

GAHOGA Floor Stand for Nanit Baby Monitor: Best for enclosed Nanit hold

GAHOGA Floor Stand for Nanit Baby Monitor, floor stands for baby monitor cameras
9.3/10Our score
  • Fits Nanit Pro, Plus and Original
  • 360 degree enclosed protection
  • Adjusts from 37.4 to 68.8 in
  • Gooseneck supports up to 2.6 lb

A Nanit-focused stand with a fully enclosed camera holder, designed to reduce loose connections and accidental drops.

See it on Amazon

Pros

  • Enclosed Nanit camera holder
  • Higher 2.6 lb gooseneck support
  • Base slides under cribs

Cons

  • Nanit-only fit
  • Camera not included

The GAHOGA Nanit stand suits Nanit owners who worry about loose connections.

It fits Nanit Pro, Nanit Plus and Nanit Original cameras, and the camera is not included.

The fully enclosed holder wraps around the camera rather than using an open-style mount.

That enclosed design is the key difference from the other Nanit picks.

GAHOGA says it helps reduce accidental drops, loose connections and unstable contact.

If your current Flex mount feels less secure, this design may address that concern more directly.

The stand adjusts from 37.4 to 68.8 inches, and the reinforced gooseneck supports up to 2.6 lb.

The oversized metal base has non-slip pads and can slide under cribs, which helps when floor space near the crib is tight.

The trade-off is Nanit-only fit.

HelloBaby and Owlet owners should choose a universal stand instead.

If you want a complete camera and stand set, the Nanit monitor above is the other route.

GAHOGA Floor Stand for Nanit Baby MonitorCheck it on Amazon
7

CaGuan Baby Monitor Floor Stand for HelloBaby/Nanit: Best for simple universal setup

CaGuan Baby Monitor Floor Stand for HelloBaby/Nanit, floor stands for baby monitor cameras
9.2/10Our score
  • Adjusts from 37.4 to 69 in
  • Heavy-duty metal construction
  • Fits cameras with a 1/4 inch threaded hole
  • No drilling

A straightforward universal floor stand for HelloBaby, Nanit Pro with Flex Stand, Infant Optics, Owlet and similar cameras.

See it on Amazon

Pros

  • Simple universal fit
  • Heavy-duty construction
  • Portable between rooms

Cons

  • Fewer stated details on cable management
  • Camera sold separately

The CaGuan stand suits buyers who want a simple universal floor stand without extra adapters or cable systems.

It adjusts from 37.4 to 69 inches and fits HelloBaby, Nanit Pro with Flex Stand, Infant Optics, Owlet, Motorola, VAVA and other cameras with a 1/4 inch threaded hole.

The value here is range and simplicity.

A tall pole gives you an overhead view, and the heavy-duty metal construction supports that height.

No drilling means you can move it between a nursery, bedroom or living room as routines change.

This stand works best for parents who already know their camera has a 1/4 inch threaded hole.

That check takes a minute and prevents a return.

If you own a Nanit Pro, confirm whether you will use the Flex Stand path or a direct adapter.

The trade-off is fewer stated details on cord routing and gooseneck weight limits.

If tidy cords matter most, the Jartoo stand below includes a cable and routing hardware for Type-C cameras.

CaGuan Baby Monitor Floor Stand for HelloBaby/NanitCheck it on Amazon
8

Jartoo Floor Stand for Nanit Pro Baby: Best for hidden cable routing

Jartoo Floor Stand for Nanit Pro Baby, floor stands for baby monitor cameras
9.1/10Our score
  • Adjusts from 52 to 67 in
  • 19.3 in gooseneck supports up to 2.4 lb
  • 3 m cable and 3 adapters included
  • Cable hiding for Type-C cameras

A wide-fit stand with three adapters and internal cable routing for Type-C cameras, aimed at tidier cord runs.

See it on Amazon

Pros

  • Adapters and cable included
  • Hidden cable option for Type-C
  • Weighted oversized base

Cons

  • Minimum height is 52 in
  • Cable hiding needs a Type-C port

The Jartoo stand suits parents who want cable hiding and adapters in the box.

It adjusts from 52 to 67 inches and fits HelloBaby, Eufy, Momcozy, Nanit, VAVA and other cameras with three adapter types.

The camera is not included.

The package includes a floor stand, a 3 m data cable and hook-and-loop fasteners.

Cable hiding runs the power cord inside the stand, but Jartoo limits that feature to cameras with a Type-C power port.

Check your camera port and cord size before you order.

The 19.3 inch gooseneck supports up to 2.4 lb and bends for a wide viewing angle.

A weighted iron base and anti-slip pads help stability, and the segmented riser sets the height for a crib, bassinet or other nursery furniture.

The trade-off is the 52 inch minimum height.

That is fine for many cribs, but it is taller than the lowest settings on other stands.

If you need a low bassinet view, a stand that starts near 37 inches may fit better.

Jartoo Floor Stand for Nanit Pro BabyCheck it on Amazon
9

AISVAN 67 Baby Monitor Floor Stand: Best for Owlet and HelloBaby mix

AISVAN 67 Baby Monitor Floor Stand, floor stands for baby monitor cameras
8.6/10Our score
  • Adjusts from 37 to 67 in
  • Flexible gooseneck arm
  • Aluminium and metal build
  • Fits Owlet, HelloBaby, Nanit Pro and 1/4 inch cameras

A budget-friendly universal stand that reaches 67 inches and bends at the gooseneck for crib, bassinet and toddler bed views.

See it on Amazon

Pros

  • Tall 67 in reach
  • Tool-free install and removal
  • Broad 1/4 inch fit

Cons

  • Fewer stated stability details
  • Baby monitor not included

The AISVAN stand suits budget-minded owners who want a tall universal stand for Owlet, HelloBaby and Nanit Pro cameras.

It adjusts from 37 inches to 67 inches, and the gooseneck bends in any direction for angle control.

Compatibility covers Owlet Cam, Owlet Cam 2, Owlet Dream Sight Gen 3, Infant Optics DXR-8 Pro, Nanit Pro and HelloBaby models, plus other cameras with a standard 1/4 inch threaded hole.

The baby monitor is not included.

Tool-free installation and removal help if you move the stand between rooms or store it when the nursery phase ends.

The aluminium and metal build keeps the pole light enough to move, while the 67 inch height still gives an overhead crib view.

The trade-off is fewer stated details on base weight, gooseneck load and cord routing.

If those details matter to you, the GAHOGA and Jartoo stands state more about stability and cables.

For basic reach and fit, this stand covers the core job.

AISVAN 67 Baby Monitor Floor StandCheck it on Amazon

How do floor stands compare with other baby monitor mounts?

A baby monitor floor stand gives you height and movement without wall damage. A wall mount gives you a fixed overhead view.

A clip or Flex mount gives you a close view from furniture or a crib edge.

Our best baby monitor mount guide covers clips, shelves and other holders.

Use that guide if you want the camera close to the crib and you have suitable furniture nearby.

A floor stand is better when you rent, when walls are not suitable for drilling, or when you want to move the camera between rooms.

It is also better when cords need to stay away from the sleeping area.

A wall mount can be better when floor space is tight or when you want a permanent, high view.

Our wall-mounted baby monitor guide lists that option for comparison.

For a wider choice of freestanding supports, our best baby monitor stand guide covers options beyond floor stands.

Read both guides if you are still deciding between a floor stand and another support type.

How we compared these floor stands for baby monitors

We compared height range, camera fit, base stability and cord handling for each stand. Height matters because the camera needs to sit above the crib rail.

Fit matters because a universal thread is not the same as a brand-specific snap connection.

We checked gooseneck support limits where they were stated.

A stand that supports 2.2 lb or 2.6 lb gives you a clear check against your camera weight.

We also noted whether adapters, cables or cable straps were included.

We did not test these stands in person.

Our ranking uses the stated specs, the model compatibility lists and buyer patterns from the product data.

That is why fit checks matter so much in the advice below.

If you own a VTech camera, check our VTech floor stand guide before you choose a universal model.

Some VTech setups need a specific holder rather than a generic thread fit.

What height do you need for a baby monitor floor stand?

Most parents need a stand that reaches at least 55 to 60 inches for a crib. That height puts the camera above the rail so you can look down into the sleeping area.

A bassinet may need less height, while a tall crib may need more.

Short settings for bassinets and bedside sleepers

A minimum height near 30 to 37 inches helps with bassinets and lower bedside sleepers.

The HelloBaby stand starts at 30 inches, while most universal stands start near 37 inches.

Lower settings also help when you place the stand close to a low bassinet.

You can then bend the gooseneck to center the baby in the frame.

Tall settings for cribs and toddler beds

A maximum height near 67 to 69 inches gives you more overhead angle.

That wider view can show the full mattress without moving the base closer to the crib.

Taller settings also help as a baby grows into a toddler bed.

You can raise the camera rather than moving the stand across the room.

Which camera fit should you check before you buy?

Check the mount type first, then the exact model list. A 1/4 inch threaded hole fits many universal stands, but Nanit Pro cameras often use a snap fit or Flex Stand adapter.

Nanit Pro and Nanit Plus cameras

Nanit owners should look for a Nanit-specific holder or a stated Flex Stand path.

The Didalo and GAHOGA Nanit stands use that approach, while universal stands may need the Flex Stand.

Our Nanit mount comparison explains floor, wall and Flex choices in more detail.

Read it if your current Nanit mount feels loose or awkward.

HelloBaby, Owlet and other brands

HelloBaby owners should check the exact HB model list, such as HB6550, HB6560 or HB65.

Owlet owners should check whether the stand lists Owlet Cam, Cam 2 or Dream Sight Gen 3.

For other brands, a standard 1/4 inch threaded hole is the usual universal fit.

Confirm that hole on your camera before you order a generic stand.

How stable should a baby monitor floor stand base be?

Look for a weighted base, non-slip pads and a gooseneck weight limit. A tall pole magnifies any wobble at the base, so base design matters more than it first appears.

A heavy metal base helps on hard floors, while non-slip pads add grip.

GAHOGA and Jartoo state weighted or oversized bases with pads, and the Didalo uses a heavy solid iron base.

Check the gooseneck limit against your camera weight.

Stands here state limits from 2.2 lb to 2.6 lb, and the Jartoo gooseneck supports up to 2.4 lb.

A camera near the limit may sag over time, so leave some margin when you can.

Place the stand on a level surface and keep the base away from walkways.

A stable base still needs a sensible spot where a crawling baby or toddler is less likely to bump it.

How do you keep baby monitor cords safe on a floor stand?

Route the power cord down the pole and away from the crib. That keeps cords out of reach and stops a baby from grabbing or tangling in them.

The Jartoo stand includes a 3 m cable and fasteners, with cable hiding for Type-C cameras.

Other stands rely on you to route the cord neatly along the pole and secure it with straps or clips.

Keep the outlet position in mind before you set the height.

A stand placed far from an outlet may need a longer cord run, which can create loose loops on the floor.

Check that the camera angle still works after you route the cord.

A tight cord can pull the gooseneck off center, so leave enough slack at the camera end.

When should you choose a floor stand over a wall mount?

Choose a floor stand when you rent, move rooms often or cannot drill. You get height and angle control without permanent holes or adhesive strips.

Choose a wall mount when you want a fixed overhead view and you have a suitable wall near the crib.

That setup can save floor space and keep the camera out of traffic areas.

If you travel with a camera, a floor stand is easier to pack and move than a wall mount.

Our dual camera guide for cars covers a different travel use case, so do not use a nursery floor stand as a car mount.

For homes with more than one sleeping space, a multi-camera baby monitor guide may fit better than moving one camera.

That choice depends on whether you need simultaneous views or a single movable view.

Verdict: which baby monitor floor stand should you buy?

Buy the Didalo for a Nanit Pro camera, the HelloBaby stand for a HelloBaby camera, and a universal GAHOGA stand when your brand fit is less certain. That rule matches the top picks to the most common ownership cases.

If you want the camera and stand together, the Nanit Smart Baby Video Monitor is the complete option.

If tidy cords matter most, the Jartoo stand includes adapters and a cable for Type-C cameras.

Before you order, confirm your exact camera model, the weight limit and the height you need for your crib or bassinet.

Those three checks prevent most fit problems with a baby monitor floor stand.

Once the stand is set, raise the pole, bend the gooseneck, check the view from your phone and route the cord away from the crib.

Recheck the angle after any move, and your freestanding setup should give you a clear, stable view.

Our top 3 picks at a glance

  1. 1 Didalo Floor Stand for Nanit Pro Baby
    Best for Nanit Pro owners

    Didalo Floor Stand for Nanit Pro Baby

    9.7/10 our score

    See it on Amazon
  2. 2 GAHOGA 37-69 Adjustable Height Floor Stand
    Best for wide camera fit

    GAHOGA 37-69 Adjustable Height Floor Stand

    9.6/10 our score

    See it on Amazon
  3. 3 HelloBaby Baby Monitor Floor Stand
    Best for HelloBaby cameras

    HelloBaby Baby Monitor Floor Stand

    9.6/10 our score

    See it on Amazon

Frequently asked questions

How tall should a baby monitor floor stand be?

Most stands here adjust from about 37 inches to 67 to 69 inches. Set the camera above the crib rail so you look down into the bassinet or crib, then bend the gooseneck to center the view.

A shorter stand can work for a bassinet, while a taller setting suits a standard crib.

Are floor stands safer than wall mounts for baby monitors?

A floor stand keeps the camera and cords away from the crib without drilling. That helps renters and avoids reaching into the sleeping area.

Wall mounts still give a fixed overhead view, so compare the two setups before you choose.

Will a universal floor stand fit my camera?

Many universal stands fit cameras with a standard 1/4 inch threaded hole. Check your camera model in the compatibility list before you order.

Nanit Pro cameras often need a Nanit-specific snap fit or a Flex Stand adapter, so confirm that detail first.

Can I move a baby monitor floor stand between rooms?

Yes, most freestanding stands move without tools or wall damage. That makes them useful for a nursery, a shared bedroom or a grandparent's home.

Move the stand to a level surface and recheck the camera angle after each move.